GReddy for Nissan 350Z

We will not be undersold on new GReddy products!!

Front left quarter view of GReddy Project 350ZFrontal view of GReddy Project 350ZFront right quarter view of GReddy Project 350ZRight rear quarter view of GReddy Project 350ZRear view of GReddy Project 350Z
Front wheelrearwheel.jpg (99362 bytes)  Interior view of GReddy Project 350ZGReddy Profec-E01 boost controller custom mounted in GReddy Project 350Z

With a similar flow rate and muffler can to GReddy's Power Extreme exhaust systems, the EVO's new offset tip design improves road clearance.  Another benefit is the appearance of a small muffler on the car, but still allows for excellent sound suppression.  The newly added embossed GReddy logos on both the SUS tip and muffler can will set the system apart from the rest.

GReddy Evolution exhaust system NOTE:  This is NOT the G35 system.  Photo is for muffler style only!

EVO exhaust system for the Infiniti G35 4-door - Part # 10126630 - List $ 635.00  Our Price $499.00

NEWS: There will be two exhaust systems available from GReddy for the new Nissan 350Z.  The first will be a dual EVO system that will be a true dual cat-back system!  No y-pipe needed.  The piping from the catalytic converters will be 60mm and will have an integrated H-pipe to even out exhaust gases.  The pictures below are of the prototype system currently on GReddy's Project 350Z.  The second type will be a single pipe cat-back system that has a similar configuration as the factory exhaust system.  The muffler will be situated sideways and will have dual tips.  Pricing and availability to be determined.

GReddy EVO exhaust on Nissan 350ZGReddy EVO true dual exhaust system on Nissan 350ZGReddy EVO true dual cat-back exhaust system with crossover pipeGReddy EVO true dual cat-back exhaust system on Nissan 350Z

 Email us for ordering and availability details.

[top]

It takes a tremendous amount of money and time to successfully increase the power of a naturally aspirated engine.  With the GReddy bolt-on turbocharger kit for the 350Z and G35 coupe, you can obtain instant horsepower gains with less time and money, while still having room for upgrading.  The kit has been designed and tested to match the best-sized turbo for the application.  This means you will get good response, smooth drivability, performance that can still be upgraded, and lasting reliability.  The system is based on dual TD05-18G GReddy/MHI turbochargers with twin external GReddy/Tial wastegates.  The kit comes with six new larger RC Engineering fuel injectors and a pre-programmed E-Manage to control the fuel.  The kit includes all the lines and hardware to install the kit and even has an oil pan with return lines already plumbed.  


The retail pricing on this kit is $6495.00.  We are currently selling the 350Z kit at a substantial discount.  Call for details.

Cutaway GReddy turbocharger
GReddy twin turbo kit for the 350ZGReddy twin turbo kit for the 350ZGReddy twin turbo kit for the 350Z Pictures of the completed kit at the 2003 SEMA Show


NEWS: The pictures below are of the prototype system currently on GReddy's Project 350Z.  The system is currently putting around 350HP to the wheels with stock internals.

GReddy turbo kit installed on Nissan 350Ztop of engine with turbo kit installed 

The pictures below show the interior of GReddy's Project 350Z.  It includes a Profec-E01 electronic boost controller that works in conjunction with the GReddy eManage fuel computer that is included with the GReddy twin turbo kit for the Nissan 350Z.

Interior view of GReddy Project 350ZGReddy Profec-E01 boost controller custom mounted in GReddy Project 350Z

The pictures below are the kit installed on an Infinity G35

G35 twin turbo kitG35 twin turbo kitG35 twin turbo kit Pictures of the G35 kit at the 2003 SEMA Show

[top]

The addition of a GReddy intercooler is an excellent way of safely increasing horsepower.  By reducing the engine's inlet temperatures, a denser air charge will enter the engine; this will make more power at the same boost level.  The 350Z specific kit is a front mount design based on a 3 row Type 23 Supra R-spec core and will include all the necessary mounts, all-aluminum piping, and hoses required to install the kit.  All kits are designed to give maximum cooling capacity while allowing for minimal pressure drops. This is achieved by properly sizing the core and tuning the internal core with a different inner fin pattern in the R-spec core.  These cores are an air-to-air, tube and fin design that does not require any specialized liquid plumbing.  The end of the cores are capped off with our smooth flowing heavy-duty cast aluminum endtanks.

We are currently selling this kit at a substantial discount.  Call for details.

GReddy Project 350Z with Type 23 intercoolerGReddy Type 23 intercooler for Nissan 350ZTop view of GReddy Type 23 intercooler for Nissan 350Z 350Z   G35 intercooler G35

[top]

There are other additional products that GReddy is working on to have available for the Nissan 350Z.  We will keep you posted on their price and availability as information becomes available.

GRex/Alcon Brake Upgrade
The system will be available for the front only.  These brakes are among the best in the world.

Front wheel

Body Kit
GReddy's parent company Trust (in Japan) has been working on a new body kit for the Nissan 350Z.  It consists of a front lip spoiler, side skirts, and rear under spoiler.

Click for larger view

PRICING
Front Lip Spoiler - $240.00
Side Skirts  - $480.00
Rear Under Spoiler  - $460.00

Oil Cap
GReddy's billet oil cap is available in both polished (pictured) as well as anodized blue finishes.  List: $65.00

GReddy polished billet oil capGReddy billet oil cap and radiator capCloseup of polished GReddy billet oil cap

Radiator Cap
GReddy's radiator cap adds a nice finished touch to the underhood of your Z.  List $23.00

GReddy billet oil cap and radiator capSide view of GReddy radiator capCloseup of GReddy radiator cap

ReturnClick arrow to return to 350Z Resource Page