Stillen Products for Nissan 350Z
STILLEN has just released their full body kit for the Nissan 350Z, featuring a front fascia, side rockers and rear valance, creating an aggressive touch with a superior fit and finish for the sports car. The look, feel, fit, and finish are factory quality thanks to the direct molding process STILLEN employs. Molding the urethane directly to the body of a 350Z at our in-house design studio, craftsmen are able to understand the car's contours firsthand enabling them to produce the best urethane products possible. STILLEN has been creating urethane components in this fashion for decades, and the 350Z kit is no exception. Part #1035009 - Front Fascia, #1035012 - Driver Side Rocker, #1035013 - Passenger Side Rocker, #1035018 - Rear Valance. Email us for information.
Pricing:
Front Fascia MSRP
$699.00 Our Price $594.00
Driver Side Rocker MSRP $299.00 Our Price
$239.00
Passenger Side Rocker MSRP $299.00 Our
Price $239.00
Rear Valence MSRP $351.47 Our Price
$298.75
Street Scene mesh grill MSRP $183.05 Our
Price $107.82
Stillen's
new exhaust system
Stillen's new exhaust system, crafted of
Mandrel-bent Stainless Steel, is a True Cat-Back System designed for long
service life, and helps the Z pump out an incredible 13 additional horsepower at
5600 RPM and 14-ft.lbs. of torque at 4500 RPM. At idle the STILLEN Exhaust is unobtrusive. However, when the pedal gets pushed, it comes to
life with a recognizable "STILLEN" trademark sound. It's a
sound especially associated with big horsepower & torque gains for the Z.
True cat-back design
Stainless Steel cat-back exhaust system MSRP $1275.00 Our Price $1150.00
Please note, ships in two boxes SHIPPING AS SHOWN IS TOO HIGH! Call for a more accurate shipping quote! ***Deliveries have been slower than sales, so order yours today!***
Stillen is currently working on a
supercharger system for the new 350Z. A new cowl hood will be required for
supercharger clearance.
Stay tuned for details.
Stillen's
upcoming supercharger
Hood required for
supercharged vehicles
Stillen Supercharger System MSRP $3995.00 Our Price $3795.00
Non-Track models
Brake pros is proud to offer high-performance rotors for
the Nissan 350Z. These rotors incorporate Pillar Vane technology for
maximum cooling and improved performance. Featuring a series of 144
diamond and teardrop pillars that greatly increase cooling efficiency and
strength while reducing weight. Based on the same principal as a
centrifugal pump impeller, this network of pillars increases the flow of cool
air from the center of the disc to the outer edge. The turbulence created
by the stream of incoming air around the pillars helps pump out the hot air,
which has built up within the ventilated disc. In short the rotor disc is
cooled faster and more evenly than previously possible, by up to 20%. KEY
FEATURES Cross-Drilled / Slotted - Rapidly expels friction gases and reduces
glazing of pads. Optional Slotted Only (9 Slots) - Rapidly expels friction gases
and reduces glazing of pads Pillar Vane Technology - Up to 20% better cooling,
Lighter and Stronger Heat Dam - Reduces heat build up in bell area
Thermo-Graphic Temperature Monitoring System - To determine operating
temperature of brakes on your vehicle.
Slotted Rotors 
Cross-Drilled/Slotted Rotors
Pricing for 350Z/G35 non-track model:
Slotted Front Rotors MSRP
$385.00 Our Price $308.00
Slotted Rear Rotors MSRP $355.00 Our
Price $284.00
Cross-Drilled/Slotted Front Rotors MSRP
$415.00 Our Price $332.00
Cross-Drilled/Slotted Rear Rotors MSRP
$385.00 Our Price $308.00
Track Models
Brake pros is proud to offer high-performance rotors
for the 350Z /G35 Track Models. Developed to replace the OE 12.8" front
and 12.7" rear rotors, the goal is to offer a technologically superior design
over the OE version. Incorporating Pillar Vane technology, these rotors
feature a series of 144-diamond and teardrop pillars that dramatically increase
cooling efficiency and strength while reducing weight. Based on the same
principal as a centrifugal pump impeller, this network of pillars increases the
flow of cool air from the center of the disc to the outer edge. The
additional turbulence created by the stream of incoming air around the pillars
helps pump out the hot air, which has built up within the ventilated disc.
In short the rotor disc is cooled faster and more evenly than previously
possible - up to 20%! These 350Z/G35 rotors are also put through the same
special heat treatment process as race rotors, a process that virtually
eliminates warping and cracking. Simply put: These are not OE rotors that
have simply been drilled or slotted, but performance rotors built specifically
for the 350Z and G35 with the Track Upgraded Brake Package. KEY FEATURES
Cross-Drilled / Slotted - Rapidly expels friction gases and reduces glazing of
pads. Optional slotted only (9 Slots) - Rapidly expels friction gases and
reduces glazing of pads. Pillar Vane Technology - Up to 20% better
cooling, Lighter and Stronger. Stress Relieved - To Reduce Warping and
Cracking. Heat Dam - Reduces heat build up in bell area and provides added
strength. Thermo-Graphic Temperature (Paint) Monitoring System - Helps
to determine operating temperature of brakes on your vehicle.
Slotted Rotors 
Cross-Drilled/Slotted Rotors
Pricing for 350Z/G35 track model (with factory Brembo calipers):
Slotted Front Rotors MSRP $556.00 Our Price
$445.00
Slotted Rear Rotors MSRP $546.00 Our
Price $437.00
Cross-Drilled/Slotted Front Rotors MSRP
$575.00 Our Price $460.00
Cross-Drilled/Slotted Rear Rotors MSRP $565.00 Our Price
$452.00
Brake Pads (non-track models)
Metal Matrix Front Pad Set - $55.00
Metal Matrix Rear Pad Set - $52.00
Brake Line Upgrade (all models)
Sport Line Set - $199.00
Click arrow to return to
350Z Resource Page
